Skip to content

Comparison

Hobart Commercial Dishwashers Explained: Centerline, Stero, LX and AM16, and Advansys

Hobart Commercial Dishwashers Explained: Centerline, Stero, LX and AM16, and Advansys

The Quick Answer

Hobart builds its commercial-line dishwashers in three tiers: Centerline and Stero (good), the LX and AM16 (better) and Advansys (best). All of them sanitize to the same standard and are backed by Hobart's factory service network. What changes as you move up is how many racks the machine washes per hour, the controls, and how much technology is working to cut your water, energy and labour costs. Centerline and Stero are the value picks for light to mid-volume kitchens. The LX and AM16 are built for busy, high-volume dishrooms. Advansys is the premium package for operations that want the lowest operating cost over the life of the machine.

On this page

Your dishwasher is the only machine in your kitchen that touches every single customer. Every plate, glass and fork passes through it before reaching a table. When it falls behind, you lose time, labour and sometimes a full service. That's why the brand matters, and why Hobart is a trusted option we always recommend operators.

What Makes Hobart Stand Out?

Hobart has been building commercial kitchen equipment since 1897, and it’s the most recognized name in commercial dishwashing. Some key points that span across the entire lineup:

  • Recirculating wash design. Every Hobart dish machine washes from a heated tank of detergent solution that recirculates between cycles. Cheaper fill-and-dump machines, common with chemical rental programs, drain and refill on every cycle. That means more water, more chemicals and a weaker wash.
  • ENERGY STAR across the lineup. Nearly every model in the lineup is ENERGY STAR certified, which keeps utility costs down on a machine that runs through every service.
  • A factory service network. Hobart Service is the leading provider of commercial food equipment service in North America, with factory-trained technicians across Canada and the US. When a machine goes down mid-service, that network is what gets you running again.

Hobart is part of the ITW Food Equipment Group, the same family as Traulsen and Vulcan. If you read our guide to Traulsen refrigeration, you already know the philosophy: equipment that costs more up front will ultimately save you more over time.

A light blue graphic titled "What Makes Hobart Stand Out? Dishwashing Machines" highlighting three benefits

Hobart at a Glance - Good, Better, Best



Centerline & Stero (Good)

LX & AM16 (Better)

Advansys (Best)

Controls

Digital display

Touchscreen with built-in WiFi

Touchscreen with built-in WiFi

Sanitizing

High temp or low temp

High temp or low temp

High temp or low temp

Key technology

Core wash and rinse

SmartConnect app, Tech Connect diagnostics

Soil removal, energy recovery, ventless operation, Complete Delime

Availability

Stocked with Phoenix

Stocked with Hobart

Quoted to order

Best for

Budget-driven, light to mid-volume kitchens

Busy kitchens, bars, pots and pans

High-volume kitchens, hard water, no vent hood

Relative price

$

$$

$$$


Centerline and Stero: The Good Options

Centerline and Stero are great options for operators on a tighter budget or with lower volume operations. Both are value lines from the Hobart family, both are ENERGY STAR certified, and both are built for kitchens that want dependable sanitizing without paying for technology they won't use.

Centerline is Hobart's entry line. The CUH/CUL undercounter washes 24 racks per hour through a 14.46" door opening, in high-temp (CUH) or chemical sanitizing (CUL) versions. The CDH/CDL door type steps up to 51 racks per hour with an 18" pillarless opening, and the CDH's Sense-A-Temp booster assures the 82°C (180°F) final rinse on every cycle.

Stero is its own brand under the Hobart family, a division of ITW Food Equipment Group, and it has been building dishwashers for restaurants and institutions for decades. The SUnH/SUnL undercounter washes 30 racks per hour on 90-second cycles, with a spring-assisted door, delime notification and a pumped drain and rinse. The SD3 door type runs 58 racks per hour on high-temp sanitizing and installs straight-through or in a corner.

Within the tier, the choice is simple. The Centerline undercounter gives you a slightly taller door opening. The Stero undercounter gives you six more racks per hour at the same price. And if your door type needs more throughput than the CDH, the SD3 is the step-up option to help cover busier kitchen rushes.

Popular models include the Hobart Centerline CUH-1/CUL-1 undercounter ($4,999), the Centerline CDH-1/CDL-1 door type ($6,995), the Stero SUNH-1/SUNL-1 undercounter ($4,995) and the Stero SD3-2 door type ($12,995).

LX and AM16: The Better Option

The LX undercounter and AM16 door type are the machines that made Hobart's reputation, and they are where the technology starts saving you money over time.

The LXn undercounter washes 32 racks per hour through a 17" door opening, and an optional two-level racking kit takes it to 48. It uses just 0.62 gallons (2.3 litres) of water per rack. The front touchscreen connects to Hobart's free SmartConnect app over built-in WiFi, which logs wash and rinse temperatures, flags low chemicals and tracks usage. When a health inspector asks for your sanitizing temperature records, you pull up the log on your phone instead of digging through a clipboard. Tech Connect diagnostics come standard, so a service technician can plug into the machine and read real-time data. That means faster repairs and less downtime. For bars, the [LXGER-1] glass washer ($11,669) washes gently through a 12" opening so your glassware comes out spotless, not chipped.

The AM16 door type was redesigned from the ground up, with X-shaped wash arms that double the water coverage over your ware. It installs straight-through or in a corner, and it carries the same WiFi and SmartConnect features as the LXn. The tall AM16T has a 27" opening and an NSF Pot and Pan rating, so sheet pans, stock pots and mixing bowls come out clean without a second pass through the machine.

Popular models include the Hobart LXNH-2 undercounter ($11,749), the AM16-BASX-2 door type ($26,949) and the AM16T-BASX-2 tall door type ($35,749).

Advansys: The Best Option

Advansys is Hobart's premium technology package, available on the LX and AM16 platforms. Four technologies do the heavy lifting:

  • Automatic Soil Removal (ASR) pumps food soil out of the wash tank while the machine runs. The wash water stays cleaner for longer, you change the tank less often, and your team spends less time pre-scrapping at the sink.
  • Ventless Energy Recovery condenses the steam inside the chamber and uses that heat for the next cycle, so the machine needs no vent hood. A vent hood installation can cost more than the dishwasher itself, so on a new build this feature can pay for the upgrade on day one.
  • Drain Water Energy Recovery recycles heat from the hot drain water to warm the incoming cold water, so the booster works less to reach the sanitizing rinse temperature.
  • Complete Delime with Booster Guard tells the operator when it is time to delime, doses the delimer automatically and injects it directly into the booster. Limescale is the number one killer of booster heaters, and in hard-water areas, which cover much of the Prairies and pockets of Ontario, this is not a place to play games.

We don't display Advansys models on our site, but our team can quote and order any configuration for you. Contact us for an Advansys quote.

A four-column chart titled "Hobart Premium Technology" that lists four features: Automatic Soil Removal (ASR), Ventless Energy Recovery, Drain Water Energy Recovery, and Complete Delime with Booster Guard. Each column contains three circular icons with short descriptive text below them.

What About High-Volume Kitchens?

Past the door type, Hobart builds CL rack conveyors that wash 202 to 342 racks per hour, made in Owen Sound, Ontario, and FT flight type machines that handle more than 10,000 dishes per hour for hospitals, campuses and arenas. For bakeries and commissaries, the [Hobart PW-10] ($47,479) and [PW-20] ($60,979) pot and pan washers take on the heavy, baked-on soil that a standard dish machine was never meant to handle. Conveyors and flight types are quoted to your dishroom layout, so [contact our team] for pricing.

To size the machine, count how many people you serve during your busiest hour and multiply by the number of ware items each person uses. Divide that total by 20 (a full rack holds about 20 plates or 25 glasses) and you have the racks per hour your machine needs to keep up with. Under 30, an undercounter will do. Between 30 and 60, you want a door type. Past that, we should talk about a conveyor.

How to Size Your Dishwasher

Buying a dishwasher on price alone is how kitchens end up with a machine that can’t keep up on a Saturday night. Hobart sizes its machines with one simple formula, and it starts with your busiest hour of service, not your average day:

People served in your busiest hour × Ware items per person = Total ware

Total ware ÷ 20 = Racks per hour your machine needs to wash

The 20 comes from the rack itself. A fully loaded 20" x 20" rack holds about 20 plates, 25 cups or glasses, or 100 pieces of cutlery, so dividing your total ware by 20 gives you a realistic rack count.

An infographic titled "How To Size Your Dishwasher" displaying a formula: People Served multiplied by Ware Per Person equals Total Ware, which divided by 20 equals Racks Per Hour. Below the formula is a lineup of four Hobart dishwasher models (LXn, AM16, CL Conveyor, and FT2000) with their respective hourly rack capacities

Here’s what that looks like. Say you serve 120 people in your busiest hour, and each one uses six ware items between the plate, side plate, glass, cup and cutlery. That’s 720 ware items, or 36 racks in one hour. An undercounter tops out around 30 racks per hour, so this kitchen needs a door type.

As a rule: under 30 racks per hour, an undercounter will keep up. Between 30 and 60, you want a door type. Past 60, we should talk about a conveyor. And size for where your restaurant is headed, not just where it is today. A machine that barely keeps up on opening week will fall behind the first time you add a patio or a brunch service.

Which Hobart Dishwasher Is Right for Your Kitchen?

  • Choose Centerline or Stero if you run a light to mid-volume kitchen and want Hobart-family reliability at the lowest price.
  • Choose the LX or AM16 if your kitchen is busy, you want temperature logs on your phone, or you wash pots and sheet pans (that's the AM16T).
  • Choose Advansys if you can't install a vent hood, your water is hard, or you want the lowest operating cost over the life of the machine.
"What Suits Your Space" categorizing dishwashers into three options with accompanying product photos

Still deciding between an undercounter and a hood type? Our guide to undercounter vs. hood type dishwashers breaks it down. At Phoenix Food Equipment, our team is happy to walk through your kitchen and help you find the right fit, including financing options. Shop our full range of commercial dishwashers.

Frequently Asked Questions

What is the difference between Stero and Hobart?

Stero is its own brand under the Hobart family. Both are divisions of ITW Food Equipment Group, and Hobart's service network covers both. Stero builds simple, durable machines that sit in the same value tier as Hobart's Centerline line. If you see a Stero on a dealer's floor, you are looking at Hobart engineering under a different nameplate.

Do I need a vent hood for a commercial dishwasher?

Undercounter models generally don't, because they don't produce enough vapour. Door type and larger high-temp machines generally do, unless you choose a ventless model like the AM16VL. Confirm the requirement with your local health inspector before you buy, because a surprise vent hood is the most expensive line item a warewashing area can add.

Should I choose high temp or low temp sanitizing?

High temp machines sanitize with an 82°C (180°F) final rinse. They wash better, leave no chemical residue, and let dishes flash-dry on the way out. Low temp machines sanitize with chemicals, cost less to buy and need less power, but the sanitizer is an ongoing cost that adds up every month. For most kitchens washing plates and cutlery all day, we highly recommend high temp. Low temp makes sense when your power supply is limited or the machine only runs a few cycles a day.

Why does water hardness matter for a commercial dishwasher?

Hard water leaves limescale on the heating elements and inside the booster, and scale makes the machine work harder until something fails. Every high-temp machine in a hard-water area needs regular deliming, and a water softener is a smart addition. This is also where Advansys earns its keep, since Complete Delime with Booster Guard handles the job automatically.