Italian Built High Temperature Warewashing
The DIHR DS 50 USA brings European warewashing engineering into a standard undercounter footprint, sanitizing with an 185°F rinse rather than chemicals. A double walled 304 stainless steel structure and stainless steel boiler give the machine the thermal stability and corrosion resistance to hold rinse temperature through consecutive racks, which is where lighter machines fall behind during a rush.
Clean Results, Less Rehandling
An anti-drip roof design stops condensate falling back onto finished wares, the single most common source of spotted glassware in an undercounter machine. Split interchangeable stainless steel wash and rinse arms deliver even coverage and simplify the parts inventory, and two cycles of 120 and 180 seconds let staff match the cycle to the soil level instead of rewashing.
Everything Built In
Three pumps for detergent, rinse aid and drain come standard, along with a temperature booster for quick heating, so there are no add-on kits to budget for at installation. Two racks and a cutlery cylinder ship with the machine, and the anti-vermin bottom panel closes off the cavity underneath, a detail inspectors notice in older buildings.
Capacity for a Busy Line
Rated to 30 racks per hour at 0.74 gallons of water per cycle, the DS 50 USA keeps up with a full service restaurant or bar while holding water and energy use down. The machine runs on 220-240V single phase service, and at 23.43 in. wide it fits a standard counter opening.